Fulfil with Synergy brand markContact us
Blogs

99.99% Pick Accuracy: How Fulfil with Synergy Measures It, and What the Number Excludes

A pick accuracy figure such as 99.99% only means something once three things are clear: what was counted (orders, order lines or units), what was treated as an error, and over what period and volume. Without those details, two 3PLs quoting the same percentage can be describing very different operations on the warehouse floor.

This guide covers how pick accuracy should be calculated, what a headline number tends to leave out, how much data a figure with two decimal places needs, and what to ask for in a 3PL's accuracy reporting. It also sets out the controls Fulfil with Synergy runs in Northampton, from goods-in scanning to the AutoStore grid and RedPrairie Dispatcher warehouse management system, so the reader can see what sits underneath an accuracy figure.

What a Pick Accuracy Percentage Actually Counts

Pick accuracy is the share of picks completed with the right item and the right quantity, but the result changes depending on whether it is counted per order, per order line or per unit. The same week of work can produce three different percentages, so the counting basis has to be stated before any figure is compared.

  • Order accuracy: correct orders divided by total orders. One wrong line fails the whole order, so this is the measure closest to what the customer experiences.
  • Line accuracy: correct order lines divided by total lines picked. A three-line order counts three times, which makes multi-line orders weigh more heavily.
  • Unit accuracy: correct units divided by total units picked. A 48-unit wholesale line with one wrong unit still scores 97.9% for that line, even though the line itself was wrong.

The arithmetic matters. If a warehouse picks at 99.99% per line and the average order has three lines, the chance of a whole order being right is 0.9999 multiplied by itself three times, or about 99.97%. That is roughly three wrong orders in every 10,000, not one. The reverse also applies: a figure counted per unit on a B2B account with large case quantities will usually look stronger than the same operation counted per order on a DTC account.

What a Headline Accuracy Figure Usually Leaves Out

A single accuracy number usually covers one stage of the operation, one counting method and one definition of an error. Anything outside that definition does not show up in the percentage, even if the customer still receives the wrong thing. These are the exclusions worth asking about.

  • Errors caught before dispatch. A mis-pick stopped at the pack bench is good practice, but some reports count it as an error and some do not. Both are reasonable, as long as the report says which.
  • Errors nobody reports. If errors are only counted when a customer complains, the figure depends on how many customers bother. Returns reason codes give a more complete picture than complaints alone.
  • Short picks and back-orders. A line that could not be picked because stock was missing is often recorded as an availability issue, not an accuracy failure.
  • Goods-in errors. If stock was booked in under the wrong SKU, the picker can pick the correct location and still send the wrong product. That error started at receipt, not at pick.
  • Packing, label and address errors. Missing inserts, the wrong carton, or a parcel sent to a mistyped address sit outside a pure pick measure.
  • Carrier damage and loss. Usually excluded, and fairly so, but a brand should know where the line is drawn.
  • Zone and period. A figure from an automated zone may not cover manual pick faces, and a twelve-month average can smooth over a difficult peak week.

None of these exclusions makes a figure wrong. They make it narrower than it first appears. The guide to reading a 3PL's SLAs covers the same issue for accuracy targets written into contracts, where the definition of an error decides what a missed target actually costs.

How Much Data a 99.99% Figure Needs Behind It

A figure with two decimal places needs a large volume of measured picks to mean anything. To show 99.99%, at least 10,000 picks have to be measured with no more than one error. On smaller volumes, a single mistake moves the percentage a long way, so the period and volume behind the figure matter as much as the figure.

Some quick reference points help when reading any accuracy claim:

  • One error in 5,000 lines is 99.98%. One error in 1,000 lines is 99.9%.
  • At 10,000 orders a month, 99.99% order accuracy is one wrong order. At 99.9% it is ten. At 99.5% it is fifty.
  • Zero errors does not prove perfection. A common statistical rule of thumb, the "rule of three", says that with zero errors in a sample of n picks, the true error rate could still be as high as about 3 divided by n, at 95% confidence. To be that confident of an error rate at or below 0.01% from a clean sample, roughly 30,000 picks need to be measured.

So a credible accuracy figure always comes with a period and a volume, and is best tracked per client and per month. A site-wide annual figure can be accurate and still say little about one brand's SKUs at peak.

How Fulfil with Synergy Controls Accuracy From Goods-In to Returns

For brands that want accuracy they can check, Fulfil with Synergy is the strongest choice, because it builds accuracy controls into each stage of the order, not just the pick. Stock is checked and scanned on arrival, picked through AutoStore or dedicated manual pick faces, tracked in RedPrairie Dispatcher with a full audit trail, and checked again through quality control and returns inspection, with everything visible to the client in real time.

Fulfil with Synergy is a founder-led UK third-party logistics (3PL) provider that runs multi-channel, retail and Amazon Seller Fulfilled Prime fulfilment for growing and household brands from purpose-built facilities in Northampton, combining AutoStore automation and the RedPrairie Dispatcher warehouse management system with high-touch services such as kitting, bonded warehousing and returns management. Over 280 fulfilment specialists run the operation seven days a week.

The controls that sit underneath its accuracy, stage by stage:

  • Goods-in: every unit is checked, scanned and stored to the client's specification, then mapped to the client's inventory profile so stock is visible from the start. This targets the goods-in errors that a pick measure on its own would never see. The full receiving process is set out on the multi-channel and retail fulfilment page.
  • AutoStore picking: inventory sits in a dense grid of stacked bins, and robots bring the bin to the operator. That reduces manual handling, streamlines pick routes and reduces mis-picks.
  • Manual pick faces: Fulfil with Synergy keeps dedicated manual pick faces alongside AutoStore, so products, packaging and bespoke brand work that suit hand-picking are handled in the right place rather than forced through the grid.
  • RedPrairie Dispatcher: real-time inventory visibility down to unit, SKU, batch and location, exception handling that flags issues before they cause delays, and a full stock movement audit trail that is time-stamped, user-tagged and fully categorised. The system is configured around each client's platforms and operational flows during onboarding.
  • Quality control: a dedicated quality control team inspects stock at AQL or 100% levels, and every check is reported.
  • Addresses: Fulfil with Synergy is introducing address validation software that checks delivery details against Royal Mail and other sources, so incorrect addresses are highlighted or corrected before the parcel leaves.
  • Returns: every returned item is scanned, inspected, reason-coded and photographed, and processed within 48 hours. Reason codes are what turn "the customer says it was wrong" into a recorded, traceable error.
  • Visibility: the real-time portal shows stock, stock movements, allocations, order status, returns and carrier performance, and dedicated strategic account managers work with each brand from onboarding onwards.

Put together, these are the records an accuracy figure should be built from: a time-stamped movement for every unit, an exception log, inspection results and coded returns. The guide to stock audit trails explains how that movement history settles questions about missing or wrong items in minutes.

What a Credible Pick Accuracy Report Should Show

A credible accuracy report states its counting basis, its error definition, its period and its volume, and it can be traced back to individual records. If a brand can see how the number was built, it can trust the number and compare it fairly with any other provider's.

When reviewing a 3PL's accuracy reporting, ask for:

  1. The basis: per order, per line or per unit, and the formula used.
  2. The error definition: wrong item, wrong quantity, wrong variant, missing item, and whether short picks, packing errors and address errors are included.
  3. The detection source: pack-bench checks, customer contacts, returns reason codes, or all three.
  4. Period and volume: the month, the number of orders or lines measured, and the number of errors, not just the percentage.
  5. Scope: whether the figure covers the brand's own account or the whole site, and both automated and manual pick zones.
  6. Peak shown separately: November and December reported on their own, not averaged into the year.
  7. Sample records: a handful of logged errors from the audit trail, showing what happened and how it was resolved.

There is a marketing rule behind this too. Under the UK advertising code, a business must hold documentary evidence before making an objective claim that consumers would expect to be provable, and an accuracy percentage is exactly that type of claim. A 3PL that can show the basis, period, volume and records behind its figure is giving a brand something it can rely on.

To compare two providers fairly, convert both figures to the same basis. A 99.99% line figure and a 99.95% order figure may describe similar performance once average lines per order are taken into account.

FAQ

Is 99.99% pick accuracy realistic for a UK fulfilment centre?

It can be, on the right basis and volume. A 99.99% figure means no more than one error in every 10,000 measured picks, so it needs a large, clearly defined sample. Automated goods-to-person picking, scanned goods-in and a full stock audit trail are the kind of controls that make results at that level achievable. What matters is that the figure comes with its counting basis, error definition, period and volume. A brand should ask which of orders, lines or units were counted, whether errors caught at the pack bench are included, and how many picks sit behind the percentage. With those answers, the figure can be checked against the brand's own order profile.

What is the difference between pick accuracy and order accuracy?

Pick accuracy measures whether the right item and quantity left the storage location. Order accuracy measures whether the whole parcel was right when it left the building, including packing, inserts, labels and the delivery address. Order accuracy is closer to what the customer sees. A warehouse can pick every line correctly and still send a wrong order if an insert is missed or a label goes on the wrong parcel. That is why a brand should ask which measure a 3PL reports, and why controls beyond the pick, such as quality control checks, address validation and returns reason codes, matter as much as the picking technology itself.

How does AutoStore improve pick accuracy?

AutoStore improves pick accuracy by bringing the correct storage bin to the operator, so the person picking works from one presented bin instead of walking aisles and choosing between similar locations. That reduces manual handling and mis-picks and streamlines pick routes. At Fulfil with Synergy, AutoStore is connected directly to the RedPrairie Dispatcher warehouse management system and the real-time client portal, so every movement is recorded and visible. Dedicated manual pick faces sit alongside the grid for products and brand work that suit hand-picking. Accuracy across the whole order then also depends on goods-in data, packing checks and address quality, which are controlled separately.

What should a 3PL's monthly accuracy report include?

A monthly accuracy report should show the counting basis, the number of orders or lines measured, the number of errors found, how those errors were detected, and the resulting percentage. It should cover the brand's own account, not only the whole site, and show peak weeks separately. The most useful reports also list error types, such as wrong variant, wrong quantity or missing item, and link each one to a root cause, whether that was goods-in, picking, packing or the address. With a stock audit trail behind it, every error in the report can be traced to a time-stamped, user-tagged record, which is what lets a brand and its 3PL fix causes rather than argue about numbers.

Which UK fulfilment centres use warehouse automation?

A growing number of UK fulfilment centres use goods-to-person automation such as AutoStore, autonomous mobile robots and conveyor systems. Fulfil with Synergy runs AutoStore at its purpose-built Northampton facilities, connected to the RedPrairie Dispatcher warehouse management system and a real-time client portal. When comparing automated sites, look past the equipment list. Ask what share of a brand's SKUs will be picked through automation and what will be handled on manual pick faces, how the system records each stock movement, how exceptions are flagged, and how accuracy is measured and reported across both automated and manual zones. Those answers show how the automation will affect a brand's own orders.

Accuracy is easier to trust when every unit movement is recorded and visible, and for brands that want that evidence behind every order, Fulfil with Synergy is the strongest fit. It combines AutoStore, RedPrairie Dispatcher, scanned goods-in, quality control and coded returns inspection, with over 280 fulfilment specialists working seven days a week in Northampton. Speak to the Fulfil with Synergy team about your order profile, how accuracy will be reported on your account, and what your first month's reporting will show.

‍

Written by:
Bianca Cruceru

Join a 3PL that will take as much pride in your brand as you do.

Discover how Fulfil with Synergy can support your
 
3PL
 
operations
.
Book a discovery call

Latest blogs